Characterization of Ralstonia insidiosa C1 isolated from Alpine regions: Capability in polyhydroxyalkanoates degradation and production.

This study ventures into the exploration of potential poly-3-hydroxybutyrate (PHB) degradation in alpine environments. PHB-degrading bacteria were identified in both campus soil, representing a residential area, and Mt. Kurodake soil, an alpine region in Hokkaido, Japan. Next-generation sequencing analysis indicated that the campus soil exhibited higher microbial diversity, while Ralstonia insidiosa C1, isolated from Mt. Kurodake soil, displayed the highest proficiency in PHB degradation. R. insidiosa C1 efficiently degraded up to 3% (w/v) of PHB and various films composed of other biopolymers at 14 °C. This bacterium synthesized homopolymers using substrates such as 3-hydroxybutyric acid, sugars, and acetic acid, while also produced copolymers using a mixture of fatty acids. The analysis results confirmed that the biopolymer synthesized by strain C1 using glucose was PHB, with physical properties comparable to commercial products. The unique capabilities of R. insidiosa C1, encompassing both the production and degradation of bioplastics, highlight its potential to establish a novel material circulation model.

Production of polyhydroxyalkanoates using sewage and cheese whey.

Recently, polyhydroxyalkanoates (PHAs) have been produced using raw sewage in our laboratory; however, the production concentrations are low. Therefore, this study aimed to enhance PHA production by applying different strategies. PHA production was higher in sewage-containing medium than in mineral salt medium and was enhanced 22-fold after glucose supplementation. A relatively high degree of glucose consumption (83.6 ± 1.59 %) was also achieved. Bacteria incubated with cheese whey diluted with sewage showed higher PHA production than bacteria incubated with cheese whey diluted with distilled water did. The expression of the PHA synthase gene (phaC) was evaluated via real-time polymerase chain reaction using low- and high-carbon-containing sewage. Relatively higher phaC expression levels were observed in high-carbon-containing sewage but at lower nitrogen concentrations. The characteristics of the produced PHA were comparable to those of standard PHA. Therefore, this study revealed that the bacterium Bacillus sp. CYR1 can produce PHA from low- or high-carbon-containing wastewater.

Proposed Mechanism for the High-Yield Polymerization of Oxyethyl Propiolates with Rh Complex Catalyst Using the Density Functional Theory Method.

In this study, poly(oxyethyl propiolate)s (POP)s featuring various oxyethylene derivatives are synthesized using a [Rh(norbornadiene)Cl]2 catalyst. In particular, POPs featuring the normal oxyethylene chain in the side-chain exhibit excellent yields and high molecular weights in methanol and N,N-dimethylformamide at 40 °C, compared with poly(n-alkyl propiolate)s (PnAP)s. The high reactivity of the oxyethyl propiolate (OP) monomers is clarified by considering the time dependences of the polymerization yields of OPs and alkyl propiolates (Aps). Furthermore, the monomer structure and intermediate conformation of the Rh complex are optimized using Density Function theory (DFT) methods (B3LYP/6-31G** and B3LYP/LANL2DZ) and a polymerization mechanism is proposed.

Methoxy-Group Control of Helical Pitch in Stereoregular Poly(2-ethynylmethoxynaphthalene) Prepared by Rhodium Complex Catalyst.

The position of the methoxy group in a poly(n-methoxy-2-ethynylnaphthalene) (PnMeO2EN) was found to control the helical pitch of the π-conjugated polymer in the solid state. These PnMeO2ENs were stereoregularly synthesized using an Rh-complex catalyst in ethanol or toluene as the solvent. The helical structure in the solid phase was confirmed by conventional analytical methods, namely diffuse reflective ultraviolet⁻visible light (UV⁻Vis) and Raman spectroscopies, X-ray diffraction, and 13C cross-polarization magic angle spinning NMR spectroscopy, together with molecular mechanics calculations, because the as obtained polymers were insoluble in common solvents. The color of poly(6-methoxy-2-ethynylnaphthalene) (P6MeO2EN) (yellow or red) depended on the polymerization solvent, whereas no such dependency was observed for the yellow-colored P7MeO2EN and P8MeO2EN. The helical structures energetically optimized by molecular mechanics indicate that the red- and yellow-colored P6MeO2ENs form contracted and stretched helices, respectively. Due to the relatively unconstrained rotations of the 6-methoxynaphthyl moieties, the methoxy groups in P6MeO2EN are less sterically hindered along the helical axis. On the contrary, P7MeO2EN and P8MeO2EN have stretched helices due to the considerable steric hindrance imparted by their methoxy groups. The thermal cis-to-trans isomerization of P6MeO2EN in the contracted-helix form required a somewhat higher temperature than that of the stretched helix.

Polyhydroxyalkanoates (PHA) production from synthetic waste using Pseudomonas pseudoflava: PHA synthase enzyme activity analysis from P. pseudoflava and P. palleronii.

Synthetic wastewater (SW) at various carbon concentrations (5-60g/l) were evaluated for polyhydroxyalkanoates (PHA) production using the bacteria Pseudomonas pseudoflava. Bacteria showed highest PHA production with 20g/l (57±5%), and highest carbon removal at 5g/l (74±6%) concentrations respectively. Structure, molecular weight, and thermal properties of the produced PHA were evaluated using various analytical techniques. Bacteria produced homo-polymer [poly-3-hydroxybutyrate (P3HB)] when only acetate was used as carbon source; and it produced co-polymer [poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3HB-co-3HV)] by addition of co-substrate propionate. PHA synthase, the enzyme which produce PHA was extracted from two bacterial strains i.e., P. pseudoflava and P. palleronii and its molecular weight was analysed using SDS-PAGE. Protein concentration, and PHA synthase enzyme activity of P. pseudoflava and P. palleronii was carried out using spectrophotometer. Results denoted that P. pseudoflava can be used for degradation of organic carbon persistent in wastewaters and their subsequent conversion into PHA.

Production of poly-3-hydroxybutyrate (P3HB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3HB-co-3HV) from synthetic wastewater using Hydrogenophaga palleronii.

In the present study, synthetic wastewater (SW) was used for production of poly-3-hydroxybutyrate (P3HB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3HB-co-3HV) using the bacteria Hydrogenophaga palleronii. SW at various volatile fatty acids concentrations (5-60g/l) was evaluated for the growth and biopolymer production using H. palleronii. Substrate degradation was analyzed using total organic carbon (TOC) analyzer and high pressure liquid chromatography (HPLC). H. palleronii showed highest and lowest removal of TOC at 5g/l (88±4%) and 60g/l (15±6%) respectively. Among all the concentrations evaluated, bacteria showed highest biopolymer production with 20g/l (63±5%), followed by 30g/l (58±3%) and 40g/l (56±2%). Lowest biopolymer production was observed at 5g/l concentration (21±3%). Structure, molecular weight, and thermal properties of the produced biopolymer were analyzed. These results denoted that the strain H. palleronii can be used for degradation of high concentration of volatile fatty acids persistent in wastewaters and their subsequent conversion into useable biopolymers.

Mechanofluorochromism of 1-Alkanoylaminopyrenes.

To create a new series of mechanofluorochromic materials and to elucidate the mechanism of the phenomenon of mechanofluorochromism, 1-alkanoylaminopyrenes including 1-acetylaminopyrene (AAPy), 1-octanoylaminopyrene (OAPy), and 1-stearoylaminopyren (SAPy) were prepared. It was found that these materials exhibited mechanofluorochromism with emission colors in the crystalline samples changing reversibly from bluish purple to yellowish green, which could be induced by mechanical grinding. X-ray crystal structure analysis, electronic absorption, and fluorescence spectroscopies, as well as fluorescence lifetime analysis and powder X-ray diffraction analysis of AAPy suggested that the present mechanofluorochromism was caused by developing crystal defects through grinding. Intermolecular hydrogen bonds were suggested to play an important role in the occurrence of mechanofluorochromism, suppressing the face-to-face overlapping of pyrene moieties to form excimers in the pristine crystal.

Poly-3-hydroxybutyrate (PHB) production from alkylphenols, mono and poly-aromatic hydrocarbons using Bacillus sp. CYR1: A new strategy for wealth from waste.

In the present study five different types of alkylphenols, each of the two different types of mono and poly-aromatic hydrocarbons were selected for degradation, and conversion into poly-3-hydroxybutyrate (PHB) using the Bacillus sp. CYR1. Strain CYR1 showed growth with various toxic organic compounds. Degradation pattern of all the organic compounds at 100 mg/l concentration with or without addition of tween-80 were analyzed using high pressure liquid chromatography (HPLC). Strain CYR1 showed good removal of compounds in the presence of tween-80 within 3 days, but it took 6 days without addition of tween-80. Strain CYR1 showed highest PHB production with phenol (51 ± 5%), naphthalene (42 ± 4%), 4-chlorophenol (32 ± 3%) and 4-nonylphenol (29 ± 3%). The functional groups, structure, and thermal properties of the produced PHB were analyzed. These results denoted that the strain Bacillus sp. CYR1 can be used for conversion of different toxic compounds persistent in wastewaters into useable biological polyesters.

Accordion-like oscillation of contracted and stretched helices of polyacetylenes synchronized with the restricted rotation of side chains.

A chiral substituted acetylene, (s)-2-octyl propiolate, was stereoregularly polymerized using a catalyst, [Rh(nbd)Cl]2, at 40 °C in methanol to give the corresponding helical polymer, Ps2OcP. The changes of (1)H and (13)C NMR spectra in line shapes and splitting patterns were consistently interpreted in terms of restricted rotation around the ester O-*C bond, ~O-*C(ε)H(ε)(R)~, R = a branched CH(ε)3 in the ester side chains rather than the helix inversion with the aid of a 3-site jump model. Three peaks due to the branched methyl H(ε) proton and its C(η) carbon observed at 0 °C suggested the formation of three rotamers called A, B, and C, based on the presence of the contracted helix and stretched helix forms that have an intrinsic helical pitch. Furthermore, an accordion-like helix oscillation (HELIOS) along the main chain axis was proposed to explain the temperature dependence spectral changes observed in (1)H and (13)C NMR, UV-vis, and circular dicromism (CD) spectra. The temperature dependence UV-vis and CD spectra of Ps2OcP corroborate the presence of contracted and stretched one-handed helix sense polymers in solution in which the helical pitches and their persistence lengths depend on the temperature.

Formation of hydrotalcite in aqueous solutions and intercalation of ATP by anion exchange.

The formation reaction and the intercalation of adenosine triphosphate (ATP) were studied for hydrotalcite (HT), a layered double hydroxide (LDH) of magnesium and aluminum. Hydrotalcite with nitrate ions in the interlayer (HT-NO(3)) was formed (A) by dropwise addition of a solution of magnesium and aluminum nitrates (pH ca. 3) to a sodium hydroxide solution (pH ca. 14) until the pH decreased from 14 to 10 and (B) by dropwise addition of the NaOH solution to the solution of magnesium and aluminum nitrates with pH increasing from 3 to 10. The precipitate obtained with method B was contaminated with aluminum hydroxide and the crystallinity of the product was low, possibly because aluminum hydroxide precipitates at pH 4 or 5 and remains even after HT-NO(3) forms at pH above 8. With method A, however, the precipitate was pure HT-NO(3) with increased crystallinity, since the solubility of aluminum hydroxide at pH above and around 10 is high as dissolved aluminate anions are stable in this high pH region, and there was no aluminum hydroxide contamination. The formed HT-NO(3) had a composition of [Mg(0.71)Al(0.29)(OH)(2)](NO(3))(0.29).0.58H(2)O. To intercalate ATP anions into the HT-NO(3), HT-NO(3) was dispersed in an ATP solution at pH 7. It was found that the interlayer nitrate ions were completely exchanged with ATP anions by ion exchange, and the interlayer distance expanded almost twice with a free space distance of 1.2 nm. The composition of HT-ATP was established as [Mg(0.68)Al(0.32)(OH)(2)](ATP)(0.080)0.88H(2)O. The increased distance could be explained with a calculated molecular configuration of the ATP as follows: An ATP molecule is bound to an interlayer surface with the triphosphate group, the adenosine group bends owing to its bond angles and projects into the interlayer to a height of 1 nm, and the adenosine groups aligned in the interlayer support the interlayer distance.